Reply date: 12/4/2009 9:44:12 PM
[color=blue]1. MT200 has memory for 20 files (up to 99 values for each file).
2. While the gauge excels at making single point measurements, it is sometimes desirable to examine a larger region,
searching for the thinnest point. The gauge includes a feature, called Scan Mode, which allows it to do just that.
In normal operation, the gauge performs and displays four measurements every second,
which is quite adequate for single measurements. In Scan Mode, however, the
gauge performs ten measurements every second, and displays the readings while scanning.
While the transducer is in contact with the material being measured, the gauge is keeping track of the lowest measurement it finds.
The transducer may be “scrubbed” across a surface, and any brief interruptions
in the signal will be ignored. When the transducer loses contact with the surface for
more than two seconds, the gauge will display the smallest measurement it found. [color=blue]
When the transducer is removed from the material being scanned, the gauge
will display the smallest measurement it found.
On the 【Test Set】->【Work Mode】menu item,
press to toggle between single point mode and scan mode.
3. Regarding the prices, the salesman will contact with you soon.
Andy, sales@sinowon.com [/color]